Convert your Apollo to an Apollo 10S with this Assembly Required Kit

  • Apollo 10S has the highest weight capacity and accuracy of any Apollo.

  • Upgrade to the Apollo 10S if you are doing fine detail work, or need more power.

  • Apollo 10S has a 10kg payload, 0.05mm accuracy, and about a 30cm cube working area.

  • Any Apollo 10 can convert to an Apollo 10S using this kit.

Notes

  • All your original drive belts and belt tensioners will function with the Apollo 10S upgrade kit.

  • You'll need an Assemblers Package to assemble this kit.

Package Includes

  • One Small End Effector Kit

    • Composite pallet
    • Ball Joints 3/4in-3/8 6x
    • Aluminum Washers 6x

  • Three Short Primary Arm Pair Kits

    • Composite pallets ArmL(3x) ArmR(3x) Elbo(6x)
    • Aluminum Tubes 3/4in x 19.1cm aluminum 6x
    • Ball Joints - 3/4 x 3/8 6x
    • Aluminum washers 12x
    • 3/8in jam nut 6x
    • 3/8in jam lock nut 6x
    • Bearings 10mmx26mmx8mm 12x

  • Six Short Secondary Arm Kits (approximately 30cm long)

    • Secondary Arm Tubes 3/4in x 28.1cm aluminum 6x
    • Nylon Bushings -Medium 12x
    • Magnets neodymium n52 9/16inx9/16in x12

Instructions

  1. Assemble the Primary Arms as detailed Here

  2. Assemble the Secondary Arms as detailed Here

  3. Assemble the End Effector as detailed Here

  4. Loosen all 3 belt tensioners pn1150

  5. Remove the M8 nut from the 3 primary arm axles and replace your old primary arms with the new Small arms.

  6. Snap in magnetic Secondary Arms

  7. Snap in magnetic End Effector

  8. Let your Apollo 10 know it has Short arms by selecting 'Apollo 10S' in the Dashboard.



Part Number: 0007

Apollo Components