Convert your Apollo to an Apollo 10M with this Assembly Required Kit

  • Apollo 10M has a great balance of strength, speed, and accuracy.

  • 5kg payload, 0.1mm accuracy, and about a 1 meter x 0.5 meter working area.

  • Any Apollo 10 can convert to an Apollo 10M using this kit.

Notes

  • All your original drive belts and belt tensioners will function with the Apollo 10M upgrade kit.

  • You'll need an Assemblers Package to assemble this kit.

Package Includes

  • One Medium End Effector Kit

    • Composite pallet
    • Ball Joints 3/4in-5/16 6x
    • Aluminum Washers 6x

  • Three Medium Primary Arm Pair Kits

    • Composite pallets ArmL(3x) ArmR(3x) Elbo(6x)
    • Aluminum Tubes 3/4in x 32.3cm aluminum 6x
    • Ball Joints - 3/4 x 5/16-18 6x
    • Aluminum washers 12x
    • 5/16in jam nut 6x
    • 5/16in jam lock nut 6x
    • Bearings 10mmx26mmx8mm 12x

  • Six Medium Secondary Arm Kits (approximately 60cm long)

    • Secondary Arm Tubes 3/4in x 58.1cm aluminum 6x
    • Nylon Bushings -Medium 12x
    • Magnets neodymium n52 1/2inx1/2in x12

Instructions

  1. Assemble the Primary Arms as detailed Here

  2. Assemble the Secondary Arms as detailed Here

  3. Assemble the End Effector as detailed Here

  4. Loosen all 3 belt tensioners pn1150

  5. Remove the M8 nut from the 3 primary arm axles and replace your old primary arms with the new Medium arms.

  6. Snap in magnetic Secondary Arms

  7. Snap in magnetic End Effector

  8. Let your Apollo 10 know it has Medium arms by selecting 'Apollo 10M' in the Dashboard.



Part Number: 0008

Apollo Components