Convert your Apollo to an Apollo 10L.
-
Apollo 10L has the longest reach of any Apollo 10.
-
Upgrade to the Apollo 10L if you need a longer reach, but payload isn't of concern.
-
Apollo 10L has a 1.5kg payload, 0.3mm accuracy, and a 1.5 meter x 0.7 meter working area.
-
Any Apollo 10 can convert to an Apollo 10L using this package.
Notes
-
Apollo 10L has the same diameter aluminum secondary arms as Apollo 10S &L, however the magnets and ball joints are smaller.
-
All your original drive belts and belt tensioners will function with the Apollo 10L upgrade package.
Package Includes
-
One Large End Effector
- Including installed ball joints
-
Three Long Primary Arm Pairs
- Including installed ball joints & Bearings
-
Six Long Secondary Arms (approximately 82cm long)
Instructions
-
Loosen all 3 belt tensioners pn1150
-
Remove the M8 nut from the 3 primary arm axles and replace your old primary arms with the new Long arms.
-
Snap in magnetic Secondary Arms
-
Snap in magnetic End Effector
-
Let your Apollo 10 know it has Long arms by selecting 'Apollo 10L' in the Dashboard.
